Garden boom sprayer usually refers to the spray equipment that is used in the garden and has a boom structure. This kind of equipment can realize the all-round and uniform spray of garden plants by hanging the nozzle in the air, and is widely used in the irrigation and spray of garden, lawn, flower bed and other green areas and agriculture.
Product parameter
Model |
3WPXY-600-8/12 |
3WPXY-800-8/12 |
3WPXY-1000-8/12 |
3WPXY-1200-22/24 |
Tank capacity(L) |
600 | 800 | 1000 | 1200 |
Dimension(mm) |
2700*3300*1400 |
3100*3100*1800 |
3100*3300*2100 |
4200*3600*2400 |
Horizonal range(M) |
2008/10/12 |
12/18 |
12/18 |
22/24 |
Working pressure |
0.8-1.0mpa |
0.8-1.0mpa |
0.8-1.0mpa |
0.8-1.0mpa |
Pump |
Diaphragm pump |
Diaphragm pump |
Diaphragm pump |
Diaphragm pump |
Matched Power(HP) |
50 |
60 | 80 | 90 |
Rated Flow(L/min) |
80-100 |
80-100/190 |
190 | 215 |
The working principle of garden boom sprayer is a complex and delicate process, which mainly relies on the pressure of the liquid and the unique atomization effect inside the nozzle to achieve efficient spray effect.Specifically, the entire workflow begins with the pump inside the device, a key component responsible for pressurizing the stored liquids (such as water, pesticides, fertilizers, etc.). As the liquid is pressed, it gains enough kinetic energy to be transported to the next stage.
Then the pressurized liquid is sent through a series of carefully designed pipes to the end of the garden boom sprayer, where the nozzle is located. These pipes not only ensure a steady flow of liquid, but also reduce energy loss through precise sizing and layout, so that the liquid can reach the nozzle in optimal condition.
The nozzle is the core component of the garden boom sprayer equipment, and its internal design is full of technology and wisdom. The inside of the nozzle is cleverly equipped with a special atomization device, which uses a precise hole structure, fluid dynamics principle or high-speed rotating centrifugal force to refine the input pressurized liquid into extremely small droplets. The size, shape and distribution of these droplets are carefully regulated to ensure that they efficiently cover the target area.
After the droplets are formed, the nozzle will also use physical mechanisms such as air flow or mechanical vibration to evenly spray these tiny droplets to the target area. Air flow can be achieved by natural wind or a fan built into the device, while garden boom sprayer vibration may rely on vibration elements inside the nozzle. These mechanisms work together to enable the droplets to be evenly distributed on the target surface, whether it is the soil of a farm, the leaves of an orchard or the vegetation of an urban green space, to be fully covered and moistened.
Precautions for use
Safe operation: When using the garden boom sprayer, the safe operation procedures should be observed to ensure the personal safety of the operator.
Reasonable adjustment: According to actual needs, reasonable adjustment of the height and Angle of the boom, as well as the atomization effect and spraying amount of the nozzle.
Maintenance: Regular maintenance of the garden boom sprayer equipment, check whether each part of the equipment is intact, whether the connection is firm, etc., to ensure the normal operation of the equipment.
Environmental protection: When using the boom sprayer, attention should be paid to environmental protection to avoid adverse effects on the environment and ecology.